£699.00 – £825.00
This collaboration has been in the mix for years – and finally we have our own exclusive sail to offer at Severneshop. We listened to what our customers wanted most from their premium windsurf sails and responded with the BLADE SVS v1.
Limited build numbers for exclusivity ensuring your sails set you out from the crowd.
Exclusive ‘Revolution Orange’ colourway to reflect its lightweight, sharp performance mantra
3 year Limited Warranty underwritten by Severneshop
2 Year Life Cycle ensuring your Blade SVS looks fresh for longer
This high abrasion area is made from only 1 panel and does not carry any exposed seams, preventing any potential weak point in this area. As a result, seam creep and seam-related failure have been eliminated.
eM3 is developed to combine the performance of the e-series cloths with maximum durability.
The use in the upper panels reduces not only the overall sail weight but also the swing weight, aiding manoeuvrability and control. Used in the BLADE and in the FREEK.
All Severne wave sails have 25mm double stitched window seams. The wider, single colour seam tape ensures maximum tear strength and crash resistance.
Boom height gauge for ease of reference.
A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching, we can measurably reduce weight and swing weigh and at the same time, increase strength.
A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.
Based on the proven eM3 platform, the high load eM4 material features twice the amount of X-Ply fibre and increased film thickness to maximise durability. This new material allows weight reduction whilst maintaining puncture resistance and tear strength. Used in the lower impact zone in the sail.
With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.
Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.
Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.
|3.7||372||146||5||2.66||ADJ||SEVERNE 340 Wave|
|4.2||385||157||5||2.72||FIXED||SEVERNE 370 Wave|
|4.7||405||162||5||2.87||FIXED||SEVERNE 400 Wave|
|5.3||426||168||5||3.09||FIXED||SEVERNE 400 Wave|
|5.7||433||176||5||3.25||FIXED||SEVERNE 430 Wave|
|* Recommended mast lengths are dependent on rider weight: lighter riders may prefer a shorter/softer mast, while heavier riders may prefer a longer/stiffer mast.|