£789.00 – £949.00
The Severne Blade has defined the 5-batten wave sail category for nearly two decades.
With the new GRADIENT PANEL TECHNOLOGY improvements are obvious. Lighter weight and better stability.
With the new gradient panel technology improvements are obvious. Lighter weight and better stability.
Using the new gradient panel technology. Corners have overlapped panels which reduces the amount of patching. At the same time these overlapped areas extend into the body of the sail so it transitions the load much better, will be less stretch over time. It’s a more stable way of building sails.
The gradient panel technology logically reduces weight, increases strength and controls stretch. Overall weight is reduced but the more significant improvement is the feel – quicker reacting and lighter feel.
Rather than a single curved luff panel, we use separate panels – split luff – that radiate out of the head and tack corners. This perfectly aligns the sail material with the direction of load.
Previously the curved panel would have bias stretch in all the wrong places. Direct transmission of power. Increased longevity.
Corners have overlapped panels which reduces the amount of patching. At the same time, these overlapped areas extend into the body of the sail so it transitions the load much better, will be less stretched over time. It’s a more stable way of building sails.
Rather than a single curved luff panel, the Blade uses separate panels that radiate out of the head and tack corners. This perfectly aligns the sail material with the direction of load. Previously the curved panel would have bias stretch in all the wrong places. Direct transmission of power. Increased longevity. Total Control.
VX2 is a vertically oriented X-Ply featuring increased fibre density for stability and control, reduced film thickness for less weight, and our proven scrim layer for dependable durability. The 2 signifies the film thickness in mil.
All Severne wave sails have 25mm double stitched window seams. The wider, single colour seam tape ensures maximum tear strength and crash resistance.
A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching, we can measurably reduce weight and swing weigh and at the same time, increase strength.
A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.
With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.
Based on the proven eM3 platform, the high load eM4 material features twice the amount of X-Ply fibre and increased film thickness to maximise durability. This new material allows weight reduction whilst maintaining puncture resistance and tear strength. Used in the lower impact zone in the sail.
Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.
Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.
|3.0||344||140||5||2.18||ADJ||SEVERNE 340 Wave|
|3.3||341||141||5||2.16||ADJ||SEVERNE 340 Wave|
|3.5||352||146||5||2.24||FIXED||SEVERNE 340 Wave|
|3.7||369||148||5||2.34||FIXED||SEVERNE 340 Wave|
|4.0||379||150||5||2.42||FIXED||SEVERNE 370 Wave|
|4.2||385||154||5||2.49||FIXED||SEVERNE 370 Wave|
|4.5||404||157||5||2.64||FIXED||SEVERNE 370 Wave|
|4.7||406||160||5||2.68||FIXED||SEVERNE 400 Wave|
|5.0||414||164||5||2.78||FIXED||SEVERNE 400 Wave|
|5.3||423||168||5||2.86||FIXED||SEVERNE 400 Wave|
|5.5||429||170||5||2.95||FIXED||SEVERNE 400 Wave|
|5.7||433||171||5||3.02||FIXED||SEVERNE 430 Wave|
|6.2||455||174||5||3.18||FIXED||SEVERNE 430 Wave|
|6.7||462||183||5||3.31||FIXED||SEVERNE 460 Wave|
|* Recommended mast lengths are dependent on rider weight: lighter riders may prefer a shorter/softer mast, while heavier riders may prefer a longer/stiffer mast.|
If you are based outside of the UK, we do not currently have postage available to your country during checkout. Use the form below to directly request an accurate delivery cost to your location and we'll be in touch as soon as we have a confirmed cost.
So you would like to try one of the exciting ranges of Severne sails from Severneshop.com?
Only we offer Demo sails sent directly to your door to try at your local sailing spot and at your leisure. For only £30 (UK mainland) to cover postage we will send you your choice of sail, a compatible mast and extension so your experience with our demo kit is the best anywhere.
We will hold your card details for a security deposit of £1000 but will only cash this if the sail is not returned on time. It’s easy. You try… then you buy - The SeverneShop way!
Complete your details below to let us know of your interest.