£540.00 – £620.00
The smaller sizes feature a higher cut foot and geometry biased towards wave and high wind bump and jump. Larger sizes have a lower cut foot to generate more drive in lighter winds but still maintain the light, throw about feel.
For 2018, major updates include eM3 upper panels for reduced swing weight and more dynamic ex. And new geometry on the 6.5 and 7.0 sizes to better suit the freewave category.
FreeMove boards, FreeRide boards, Crossover boards, Wave boards
RDM BLUE – High end performance with increased reliability.
GORILLA – For durability with an unconditional 2 year limited warranty
APEX – High end performance with increased reliability.
ARC – For durability
ENIGMA – For the ultimate in light weight and instant response
METAL – For value
This high abrasion area is made from only 1 panel and does not carry any exposed seams, preventing any potential weak point in this area. As a result, seam creep and seam-related failure have been eliminated.
eM3 is developed to combine the performance of the e-series cloths with maximum durability. The addition of a 90-degree pre preg polyester scrim has provided unique tear resistant characteristics and the off-axis loads are carried through the 22-degree X-ply fibres. The red and new blue adhesive maintain the UV resistance and tear strength, while the reduced film thickness significantly reduces the weight. The use in the upper panels reduces not only the overall sail weight, but also the swing weight, aiding manoeuvrability and control.
All Severne wave sails have 25mm double stitched window seams. The wider, single colour seam tape ensures maximum tear strength and crash resistance.
A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching, we can measurably reduce weight and swing weigh and at the same time, increase strength.
Boom height gauge for ease of reference.
A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.
With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.
Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.
|3.7||370||146||2.5||4||ADJ.||SEVERNE 370 WAVE|
|4.0||377||152||2.6||4||ADJ.||SEVERNE 370 WAVE|
|4.2||390||154||2.7||4||ADJ.||SEVERNE 370 WAVE|
|4.5||402||156||2.9||5||FIXED||SEVERNE 370 WAVE|
|4.7||404||159||3.0||5||FIXED||SEVERNE 400 WAVE|
|5.0||418||162||3.1||5||FIXED||SEVERNE 400 WAVE|
|5.3||430||168||3.2||5||FIXED||SEVERNE 400 WAVE|
|5.5||432||171||3.3||5||FIXED||SEVERNE 430 WAVE|
|5.7||440||175||3.3||5||FIXED||SEVERNE 430 WAVE|
|6.0||448||180||3.4||5||FIXED||SEVERNE 430 WAVE|
|6.5||454||190||3.7||6||FIXED||SEVERNE 430 WAVE|
|7.0||465||196||3.9||6||FIXED||SEVERNE 460 WAVE|
|7.5||483||198||4.3||6||FIXED||SEVERNE 460 WAVE|
|8.0||494||200||4.5||6||FIXED||SEVERNE 490 WAVE|
|* Recommended mast lengths are dependent on rider weight: lighter riders may prefer a shorter/softer mast, while heavier riders may prefer a longer/stiffer mast.|