Save up to 50% – Join the revolution!

Severneshop Sail And Kit Cleaner

£8.99

  • The 1st Specifically Developed Windsurfing Kit Cleaner
  • Developed Over 6 Years By Our Very Own Team 
  • Brings Sail Colours Back To Life – It Will Amaze You!
  • No Solvents, No Stitch Rotting, No Monofilm CloudingCan Be Used from a Bucket or a Steam/Pressure Washer 

In stock

International Shipping

If you are outside of the UK Mainland, please call Neil on +44(0)7515 553535 for your shipping cost. This allows us to provide you with consistently competitive prices.

Product Description

This is a genuinely NEW product developed by Neil Greentree (Severneshop Team Boss) over 6 years to solve the problem of dirt discolouration of the sail fabric from general dirt and contaminants in the sea or lake. With properties that encourage salt dissolution and  foaming agents that lift ingrained dirt and staining, Severneshop Sail/kit Cleaner can be used safely to clean everything from your sails to your booms, extensions, in fact all your windsurfing hardware ( Not wetsuits etc). See Instructions for dilution guidance.

NOTE THE CLEANER BOTTLE DOES NOT HAVE SAFETY DATA ON IT – SEE BELOW FOR THE SAFETY DATA SHEET

 

Instructions For use:

Wet sail well before application. Apply by spray, mop, sponge or brush. Allow to dwell. Agitate if necessary and rinse well with hot/cold water. Dilutions: Degreasing Hot: 1:20 Cold 1:8 General cleaning Hot 1:50 Cold 1:30,

 

 

Safety Data Sheet

SAFETY DATA SHEET G101 According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830 of 28 May 2015.

SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name G101 Product number 237-5 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Cleaning agent. This product is not recommended for any industrial, professional or consumer use other than the Identified uses above. 1.3. Details of the supplier of the safety data sheet Supplier Autosmart International Ltd Lynn Lane, Shenstone, nr Lichfield Staffordshire. WS14 0DH England www.autosmartinternational.com Tel: +44 (0) 1543 481616 (09:00 – 17:00) Fax: +44 (0) 1543 481549 (09:00 – 17:00) info@autosmartinternational.com Contact person Mr. Russell Butler 1.4. Emergency telephone number Emergency telephone Mob: +44 (0) 7808 971321 (24hrs) Tel: +44 (0) 1543 481616 (09:00 – 17:00) Fax: +44 (0) 1543 481549 (09:00 – 17:00) If you urgently need medical help or advice but it’s not a life-threatening situation, call 111 free from any phone to speak to an NHS adviser. The 24-hour NHS 111 service can give you healthcare advice or direct you to the local service that can help you best. The NHS 111 service will also be available via the harmonised European number for medical advice 116 117

SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (EC 1272/2008) Physical hazards Not Classified Health hazards Skin Corr. 1C – H314 Eye Dam. 1 – H318 Environmental hazards Not Classified 1/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Classification (67/548/EEC or 1999/45/EC) Xi;R38,R41. 2.2. Label elements Pictogram Signal word Danger Hazard statements H314 Causes severe skin burns and eye damage. Precautionary statements P264 Wash contaminated skin thoroughly after handling. P280 Wear protective gloves. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/ container in accordance with national regulations. Contains C9-C11 Alcohol ethoxylate (6), Alcohols, C12-13 – branched and linear, ethoxylated (>5 – 10 EO), SODIUM HYDROXIDE, 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,NC8-18(even numbered) acyl derivs., hydroxides, inner salts Detergent labelling < 5% amphoteric surfactants, < 5% non-ionic surfactants, < 5% perfumes, < 5% phosphates, Contains d-LIMONENE Supplementary precautionary statements P332+P313 If skin irritation occurs: Get medical advice/ attention. P390 Absorb spillage to prevent material damage. P406 Store in a corrosion-resistant/… container with a resistant inner liner. 2.3. Other hazards This product does not contain any substances classified as PBT or vPvB.

SECTION 3: Composition/information on ingredients 3.2. Mixtures Tetrapotassium Pyrophosphate 3<5% CAS number: 7320-34-5 EC number: 230-785-7 Classification Eye Irrit. 2 – H319 Classification (67/548/EEC or 1999/45/EC) Xi;R36. C9-C11 Alcohol ethoxylate (6) 2<3% CAS number: 68439-46-3 REACH registration number: Polymer Classification Acute Tox. 4 – H302 Eye Dam. 1 – H318 Classification (67/548/EEC or 1999/45/EC) Xn;R22. Xi;R41. 2/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Alcohols, C12-13 – branched and linear, ethoxylated (>5 – 10 EO) 2<3% CAS number: 160901-19-9 EC number: 931-954-4 REACH registration number: N/A (Polymer) Classification Acute Tox. 4 – H302 Eye Dam. 1 – H318 Aquatic Chronic 3 – H412 Classification (67/548/EEC or 1999/45/EC) Xn;R22. Xi;R41. SODIUM HYDROXIDE 1<2% CAS number: 1310-73-2 EC number: 215-185-5 REACH registration number: 01- 2119457892-27-xxxx Substance with a Community workplace exposure limit. Classification Met. Corr. 1 – H290 Skin Corr. 1A – H314 Eye Dam. 1 – H318 Classification (67/548/EEC or 1999/45/EC) C;R35 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl- ,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts 1<2% CAS number: 97862-59-4 EC number: 931-296-8 REACH registration number: 01- 2119488533-30-XXXX Classification Eye Dam. 1 – H318 Aquatic Chronic 3 – H412 Classification (67/548/EEC or 1999/45/EC) Xi;R36. The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.

SECTION 4: First aid measures 4.1. Description of first aid measures General information Get medical attention immediately. Show this Safety Data Sheet to the medical personnel. Chemical burns must be treated by a physician. Inhalation Remove affected person from source of contamination. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Maintain an open airway. Loosen tight clothing such as collar, tie or belt. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Place unconscious person on their side in the recovery position and ensure breathing can take place. Ingestion Rinse mouth thoroughly with water. Remove any dentures. Give a few small glasses of water or milk to drink. Stop if the affected person feels sick as vomiting may be dangerous. Do not induce vomiting unless under the direction of medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Place unconscious person on their side in the recovery position and ensure breathing can take place. Maintain an open airway. Loosen tight clothing such as collar, tie or belt. 3/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Skin contact It is important to remove the substance from the skin immediately. Take off immediately all contaminated clothing. Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes and get medical attention. Chemical burns must be treated by a physician. Eye contact Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 10 minutes. Protection of first aiders First aid personnel should wear appropriate protective equipment during any rescue. If it is suspected that volatile contaminants are still present around the affected person, first aid personnel should wear an appropriate respirator or self-contained breathing apparatus. Wash contaminated clothing thoroughly with water before removing it from the affected person, or wear gloves. It may be dangerous for first aid personnel to carry out mouth-to-mouth resuscitation. 4.2. Most important symptoms and effects, both acute and delayed General information See Section 11 for additional information on health hazards. The severity of the symptoms described will vary dependent on the concentration and the length of exposure. Inhalation A single exposure may cause the following adverse effects: Corrosive to the respiratory tract. Symptoms following overexposure may include the following: Severe irritation of nose and throat. Ingestion May cause chemical burns in mouth, oesophagus and stomach. Symptoms following overexposure may include the following: Severe stomach pain. Nausea, vomiting. Skin contact Causes severe burns. Symptoms following overexposure may include the following: Pain or irritation. Redness. Blistering may occur. Eye contact Causes serious eye damage. Symptoms following overexposure may include the following: Pain. Profuse watering of the eyes. Redness. 4.3. Indication of any immediate medical attention and special treatment needed Notes for the doctor Treat symptomatically.

SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog. Use fire-extinguishing media suitable for the surrounding fire. Unsuitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire. 5.2. Special hazards arising from the substance or mixture Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up. Severe corrosive hazard. Water used for fire extinguishing, which has been in contact with the product, may be corrosive. Hazardous combustion products Thermal decomposition or combustion products may include the following substances: Very toxic or corrosive gases or vapours. 5.3. Advice for firefighters Protective actions during firefighting Avoid breathing fire gases or vapours. Evacuate area. Keep upwind to avoid inhalation of gases, vapours, fumes and smoke. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk. Cool containers exposed to flames with water until well after the fire is out. If a leak or spill has not ignited, use water spray to disperse vapours and protect men stopping the leak. Avoid discharge to the aquatic environment. Control run-off water by containing and keeping it out of sewers and watercourses. If risk of water pollution occurs, notify appropriate authorities. 4/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Special protective equipment for firefighters Regular protection may not be safe. Wear chemical protective suit. Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing. Firefighter’s clothing conforming to European standard EN469 (including helmets, protective boots and gloves) will provide a basic level of protection for chemical incidents.

SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions No action shall be taken without appropriate training or involving any personal risk. Keep unnecessary and unprotected personnel away from the spillage. Wear protective clothing as described in Section 8 of this safety data sheet. Follow precautions for safe handling described in this safety data sheet. Wash thoroughly after dealing with a spillage. Ensure procedures and training for emergency decontamination and disposal are in place. Do not touch or walk into spilled material. Avoid inhalation of dust and vapours. Use suitable respiratory protection if ventilation is inadequate. Avoid contact with skin and eyes. Avoid contact with contaminated tools and objects. 6.2. Environmental precautions Environmental precautions The product may affect the acidity (pH) of water which may have hazardous effects on aquatic organisms. Avoid discharge to the aquatic environment. Large Spillages: Inform the relevant authorities if environmental pollution occurs (sewers, waterways, soil or air). 6.3. Methods and material for containment and cleaning up Methods for cleaning up Wear protective clothing as described in Section 8 of this safety data sheet. Clear up spills immediately and dispose of waste safely. This product is corrosive. Approach the spillage from upwind. Small Spillages: If the product is soluble in water, dilute the spillage with water and mop it up. Alternatively, or if it is not water-soluble, absorb the spillage with an inert, dry material and place it in a suitable waste disposal container. Large Spillages: If leakage cannot be stopped, evacuate area. Flush spilled material into an effluent treatment plant, or proceed as follows. Contain and absorb spillage with sand, earth or other non-combustible material. Place waste in labelled, sealed containers. Clean contaminated objects and areas thoroughly, observing environmental regulations. The contaminated absorbent may pose the same hazard as the spilled material. Flush contaminated area with plenty of water. Wash thoroughly after dealing with a spillage. Neutralise with acid. Caution. May generate heat. Following dilution and neutralisation, discharge to the sewer with plenty of water may be permitted. The requirements of the local water authority must be complied with if contaminated water is flushed directly to the sewer. Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority. 6.4. Reference to other sections Reference to other sections For personal protection, see Section 8. See Section 11 for additional information on health hazards. See Section 12 for additional information on ecological hazards. For waste disposal, see Section 13.

SECTION 7: Handling and storage 7.1. Precautions for safe handling Usage precautions Read and follow manufacturer’s recommendations. Wear protective clothing as described in Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs. Handle all packages and containers carefully to minimise spills. Keep container tightly sealed when not in use. Avoid the formation of mists. This product is corrosive. Immediate first aid is imperative. Do not handle until all safety precautions have been read and understood. Do not handle broken packages without protective equipment. Do not reuse empty containers. 5/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Advice on general occupational hygiene Wash promptly if skin becomes contaminated. Take off contaminated clothing. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Wash at the end of each work shift and before eating, smoking and using the toilet. Change work clothing daily before leaving workplace. 7.2. Conditions for safe storage, including any incompatibilities Storage precautions Store in accordance with local regulations. Store away from the following materials: Acids. Keep only in the original container. Keep container tightly closed, in a cool, well ventilated place. Keep containers upright. Protect containers from damage. Bund storage facilities to prevent soil and water pollution in the event of spillage. The storage area floor should be leaktight, jointless and not absorbent. Storage class Corrosive storage. 7.3. Specific end use(s) Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure Controls/personal protection 8.1. Control parameters Occupational exposure limits SODIUM HYDROXIDE Short-term exposure limit (15-minute): WEL 2 mg/m³ WEL = Workplace Exposure Limit Tetrapotassium Pyrophosphate (CAS: 7320-34-5) Ingredient comments No exposure limits known for ingredient(s). Alcohols, C12-13 – branched and linear, ethoxylated (>5 – 10 EO) (CAS: 160901-19-9) Ingredient comments No exposure limits known for ingredient(s). C9-C11 Alcohol ethoxylate (6) (CAS: 68439-46-3) Ingredient comments No exposure limits known for ingredient(s). SODIUM HYDROXIDE (CAS: 1310-73-2) DNEL Consumer – Inhalation; Short term : 1 mg/m³ Industry – Inhalation; Short term : 1 mg/m³ Industry – Inhalation; Long term : 1 mg/m³ 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts (CAS: 97862-59-4) Ingredient comments No exposure limits known for ingredient(s). DNEL Professional – Dermal; systemic effects: 12.5 mg/kg/day Professional – Inhalation; systemic effects: 44 mg/m³ Consumer – Dermal; systemic effects: 7.5 mg/kg/day Consumer – Oral; systemic effects: 7.5 mg/kg/day 6/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 PNEC – Fresh water; 0.0135 mg/l – Marine water; 0.00135 mg/l – Sediment (Freshwater); 1 mg/kg – Sediment (Marinewater); 0.1 mg/kg – Soil; 0.8 mg/kg – STP; 3000 mg/l 8.2. Exposure controls Protective equipment Appropriate engineering controls Provide adequate ventilation. Personal, workplace environment or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Use process enclosures, local exhaust ventilation or other engineering controls as the primary means to minimise worker exposure. Personal protective equipment should only be used if worker exposure cannot be controlled adequately by the engineering control measures. Ensure control measures are regularly inspected and maintained. Ensure operatives are trained to minimise exposure. Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Personal protective equipment for eye and face protection should comply with European Standard EN166. Wear tight-fitting, chemical splash goggles or face shield. If inhalation hazards exist, a full-face respirator may be required instead. Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. To protect hands from chemicals, gloves should comply with European Standard EN374. Considering the data specified by the glove manufacturer, check during use that the gloves are retaining their protective properties and change them as soon as any deterioration is detected. Frequent changes are recommended. Other skin and body protection Appropriate footwear and additional protective clothing complying with an approved standard should be worn if a risk assessment indicates skin contamination is possible. Hygiene measures Provide eyewash station and safety shower. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Clean equipment and the work area every day. Good personal hygiene procedures should be implemented. Wash at the end of each work shift and before eating, smoking and using the toilet. When using do not eat, drink or smoke. Preventive industrial medical examinations should be carried out. Warn cleaning personnel of any hazardous properties of the product. Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk assessment indicates inhalation of contaminants is possible. Ensure all respiratory protective equipment is suitable for its intended use and is ‘CE’-marked. Check that the respirator fits tightly and the filter is changed regularly. Gas and combination filter cartridges should comply with European Standard EN14387. Full face mask respirators with replaceable filter cartridges should comply with European Standard EN136. Half mask and quarter mask respirators with replaceable filter cartridges should comply with European Standard EN140. Environmental exposure controls Keep container tightly sealed when not in use. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. Store in a demarcated bunded area to prevent release to drains and/or watercourses. 7/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101

SECTION 9: Physical and Chemical Properties 9.1. Information on basic physical and chemical properties Appearance Liquid. Colour Fluorescent. Green. Odour Lemon. Odour threshold Not available. pH pH (concentrated solution): ~ 13.6 pH (diluted solution): ~ 10.2 @ 1% Melting point ~ 0°C Initial boiling point and range ~100°C @°C @ 760 mm Hg Flash point Not applicable. Evaporation rate Not available. Upper/lower flammability or explosive limits Not applicable. Vapour pressure Not applicable. Vapour density Not applicable. Relative density ~1.050 @ (20°C)°C Solubility(ies) Soluble in water. Partition coefficient Not available. Auto-ignition temperature Not applicable. Decomposition Temperature Not available. Viscosity ~ 1 cSt @ °C Oxidising properties Not applicable. Comments Information declared as “Not available” or “Not applicable” is not considered to be relevant to the implementation of the proper control measures. 9.2. Other information Volatile organic compound This product contains a maximum VOC content of 0 g/litre.

SECTION 10: Stability and reactivity 10.1. Reactivity Reactivity There are no known reactivity hazards associated with this product. 10.2. Chemical stability Stability Stable at normal ambient temperatures and when used as recommended. Stable under the prescribed storage conditions. 10.3. Possibility of hazardous reactions Possibility of hazardous reactions No potentially hazardous reactions known. 10.4. Conditions to avoid Conditions to avoid There are no known conditions that are likely to result in a hazardous situation. 8/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 10.5. Incompatible materials Materials to avoid Acid anhydrides. Acids. Phenols, cresols. 10.6. Hazardous decomposition products Hazardous decomposition products Does not decompose when used and stored as recommended. Thermal decomposition or combustion products may include the following substances: Corrosive gases or vapours.

SECTION 11: Toxicological information 11.1. Information on toxicological effects Other health effects There is no evidence that the product can cause cancer. Acute toxicity – oral Notes (oral LD₅₀) Based on available data the classification criteria are not met. ATE oral (mg/kg) 10,638.3 Acute toxicity – dermal Notes (dermal LD₅₀) Based on available data the classification criteria are not met. Acute toxicity – inhalation Notes (inhalation LC₅₀) Based on available data the classification criteria are not met. Skin corrosion/irritation Animal data Skin Corr. 1C – H314 Causes severe burns. Human skin model test Scientifically unjustified. Extreme pH ≥ 11.5 Corrosive. Serious eye damage/irritation Serious eye damage/irritation Eye Dam. 1 – H318 Corrosive to skin. Corrosivity to eyes is assumed. Respiratory sensitisation Respiratory sensitisation Based on available data the classification criteria are not met. Skin sensitisation Skin sensitisation Based on available data the classification criteria are not met. Germ cell mutagenicity Genotoxicity – in vitro Based on available data the classification criteria are not met. Carcinogenicity Carcinogenicity Based on available data the classification criteria are not met. Reproductive toxicity Reproductive toxicity – fertility Based on available data the classification criteria are not met. Reproductive toxicity – development Based on available data the classification criteria are not met. Specific target organ toxicity – single exposure STOT – single exposure Not classified as a specific target organ toxicant after a single exposure. Specific target organ toxicity – repeated exposure STOT – repeated exposure Not classified as a specific target organ toxicant after repeated exposure. Aspiration hazard Aspiration hazard Based on available data the classification criteria are not met. 9/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 General information The severity of the symptoms described will vary dependent on the concentration and the length of exposure. Inhalation Corrosive to the respiratory tract. Symptoms following overexposure may include the following: Severe irritation of nose and throat. Ingestion May cause chemical burns in mouth, oesophagus and stomach. Symptoms following overexposure may include the following: Severe stomach pain. Nausea, vomiting. Skin contact Causes severe burns. Symptoms following overexposure may include the following: Pain or irritation. Redness. Blistering may occur. Eye contact Causes serious eye damage. Symptoms following overexposure may include the following: Pain. Profuse watering of the eyes. Redness. Acute and chronic health hazards No specific long-term effects known. Route of exposure Ingestion Inhalation Skin and/or eye contact Target organs No specific target organs known. Medical symptoms No specific symptoms noted, but this chemical may still have adverse health impact, either in general or on certain individuals. Medical considerations Skin disorders and allergies. Toxicological information on ingredients. Tetrapotassium Pyrophosphate Other health effects There is no evidence that the product can cause cancer. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Other health effects There is no evidence that the product can cause cancer. Acute toxicity – oral Acute toxicity oral (LD₅₀ mg/kg) 7,783.0 Species Rat Acute toxicity – dermal Acute toxicity dermal (LD₅₀ mg/kg) 2,066.0 Species Rat Skin sensitisation Skin sensitisation Not sensitising. Reproductive toxicity Reproductive toxicity – development Developmental toxicity: – NOAEL: 1,000 mg/kg, Oral, Rat Specific target organ toxicity – single exposure STOT – single exposure Not classified as a specific target organ toxicant after a single exposure. 10/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Specific target organ toxicity – repeated exposure STOT – repeated exposure NOAEL 300 mg/kg, Oral, Rat Not classified as a specific target organ toxicant after repeated exposure.

SECTION 12: Ecological Information Ecotoxicity The product may affect the acidity (pH) of water which may have hazardous effects on aquatic organisms. Ecological information on ingredients. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Ecotoxicity Harmful to aquatic life. 12.1. Toxicity Toxicity Based on available data the classification criteria are not met. Acute aquatic toxicity Acute toxicity – fish Not determined. Acute toxicity – aquatic invertebrates Not determined. Acute toxicity – aquatic plants Not determined. Acute toxicity – microorganisms Not determined. Acute toxicity – terrestrial Not determined. Ecological information on ingredients. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Acute aquatic toxicity Acute toxicity – fish LC50, 96 hours: ~ 1.11 mg/l, Pimephales promelas (Fat-head Minnow) Acute toxicity – aquatic invertebrates EC₅₀, 48 hours: 1.9 mg/l, Daphnia magna Acute toxicity – aquatic plants EC₅₀, 72 hours: 2.4 mg/l, Freshwater algae Acute toxicity – microorganisms EC₀, : 3,000 mg/l, Activated sludge Chronic aquatic toxicity Chronic toxicity – fish early life stage NOEC, : 0.135 mg/l, Oncorhynchus mykiss (Rainbow trout) Chronic toxicity – aquatic invertebrates NOEC, : 0.3 mg/l, Daphnia magna 12.2. Persistence and degradability Persistence and degradability The surfactant(s) contained in this product complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No. 648/2004 on detergents. 11/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Ecological information on ingredients. Tetrapotassium Pyrophosphate Persistence and degradability The product is biodegradable. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Persistence and degradability The product is biodegradable. 12.3. Bioaccumulative potential Bioaccumulative potential No data available on bioaccumulation. Partition coefficient Not available. Ecological information on ingredients. Tetrapotassium Pyrophosphate Bioaccumulative potential The product does not contain any substances expected to be bioaccumulating. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Bioaccumulative potential The product does not contain any substances expected to be bioaccumulating. BCF: 71, 12.4. Mobility in soil Mobility The product is water-soluble and may spread in water systems. The product is non-volatile. Ecological information on ingredients. Tetrapotassium Pyrophosphate Mobility The product is soluble in water. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts Mobility The product is soluble in water. 12.5. Results of PBT and vPvB assessment Results of PBT and vPvB assessment This product does not contain any substances classified as PBT or vPvB. Ecological information on ingredients. Tetrapotassium Pyrophosphate Results of PBT and vPvB assessment This substance is not classified as PBT or vPvB according to current EU criteria. 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-,N-C8-18(even numbered) acyl derivs., hydroxides, inner salts 12/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 Results of PBT and vPvB assessment This product does not contain any substances classified as PBT or vPvB. 12.6. Other adverse effects Other adverse effects None known. Ecological information on ingredients. Tetrapotassium Pyrophosphate Other adverse effects The product may contribute to an excessive enrichment of the aquatic environment with nutrients.

SECTION 13: Disposal considerations 13.1. Waste treatment methods General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycle products wherever possible. This material and its container must be disposed of in a safe way. Disposal of this product, process solutions, residues and by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any local authority requirements. When handling waste, the safety precautions applying to handling of the product should be considered. Care should be taken when handling emptied containers that have not been thoroughly cleaned or rinsed out. Empty containers or liners may retain some product residues and hence be potentially hazardous. Disposal methods Dispose of surplus products and those that cannot be recycled via a licensed waste disposal contractor. Waste, residues, empty containers, discarded work clothes and contaminated cleaning materials should be collected in designated containers, labelled with their contents. Incineration or landfill should only be considered when recycling is not feasible. Waste class According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user based on the application for which the product was used.

SECTION 14: Transport information General For limited quantity packaging/limited load information, consult the relevant modal documentation using the data shown in this section. 14.1. UN number UN No. (ADR/RID) 1824 UN No. (IMDG) 1824 UN No. (ICAO) 1824 14.2. UN proper shipping name Proper shipping name (ADR/RID) SODIUM HYDROXIDE SOLUTION Proper shipping name (IMDG) SODIUM HYDROXIDE SOLUTION Proper shipping name (ICAO) SODIUM HYDROXIDE SOLUTION Proper shipping name (ADN) SODIUM HYDROXIDE SOLUTION 14.3. Transport hazard class(es) ADR/RID class 8 ADR/RID label 8 13/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 IMDG class 8 ICAO class/division 8 Transport labels 14.4. Packing group ADR/RID packing group III IMDG packing group III ICAO packing group III 14.5. Environmental hazards Environmentally hazardous substance/marine pollutant No. 14.6. Special precautions for user Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. IMDG Code segregation group 18. Alkalis EmS F-A, S-B Emergency Action Code 2W Hazard Identification Number (ADR/RID) 80 Tunnel restriction code (E) 14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable. SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture National regulations Health and Safety at Work etc. Act 1974 (as amended). The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009 No. 716). The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 (SI 2009 No. 1348) (as amended) [“CDG 2009”]. EH40/2005 Workplace exposure limits. 14/ 15 Revision date: 24/05/2018 Revision: 18 Supersedes date: 14/03/2016 G101 EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (as amended). Commission Regulation (EU) No 453/2010 of 20 May 2010. Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures (as amended). Dangerous Preparations Directive 1999/45/EC. Dangerous Substances Directive 67/548/EEC. Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents (as amended). 15.2. Chemical safety assessment No chemical safety assessment has been carried out. SECTION 16: Other information General information This product has been manufactured under ISO 9001 and ISO 14001 Quality and Environmental Management Systems. Classification procedures according to Regulation (EC) 1272/2008 Eye Dam. 1 – H318: Skin Corr. 1C – H314: : Calculation method. Training advice Read and follow manufacturer’s recommendations. Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision. Issued by Prepared by Autosmart International Ltd, Lynn Lane, Shenstone, Lichfield, Staffordshire, WS14 0DH, Great Britain. www.autosmartinternational.com rbutler@autosmart.co.uk Tel +44 (0)1543 481616 Revision date 24/05/2018 Revision 18 Supersedes date 14/03/2016 SDS number 11028 SDS status Approved. Risk phrases in full R22 Harmful if swallowed. R35 Causes severe burns. R36 Irritating to eyes. R38 Irritating to skin. R41 Risk of serious damage to eyes. Hazard statements in full H290 May be corrosive to metals. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the company’s knowledge and belief, accurate and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or completeness.

It is the user’s responsibility to satisfy himself as to the suitability of such information for his own particular use.

Additional Information

Dimensions 25 × 10 × 25 cm

Reviews

There are no reviews yet.

Be the first to review “Severneshop Sail And Kit Cleaner”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

If you are based outside of the UK, Rep. of Ireland or other mainland European countries, we may not currently have postage available to your country during checkout. Use the form below to directly request an accurate delivery cost to your location and we'll be in touch as soon as we have a confirmed cost.

  • This field is for validation purposes and should be left unchanged.
Severneshop