Save up to 50% - Join the revolution!

New 2020 Severne Mach 3 6.2

£749.00

  • Severne 2020 Mach 3 6.2
  • Condition; 10/10 – Its NEW!!!
  • Excellent Race/Slalom sail – Rare stockroom find!!

Out of stock

Product Description

RACE

The Mach3 development started in January with Matteo Iachino and Gonzalo Costa Hoevel. The goal was to improve low-end acceleration and power without negatively affecting the top end performance or ultralight handling.
We achieved this primarily by raising the Centre of Lift higher in the sail, increasing the leverage. Clew height and geometry were then tuned to keep the light handling characteristics and feel. With 7 battens in all sizes, the Mach3 inflates faster and reacts to gusts quicker for epic acceleration. Less battens means less weight. One of the lightest race sails on the market,
if not the lightest.

Pure Performance.

SpiderFibre

A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching, we can measurably reduce weight and swing weigh and at the same time, increase strength.

Seamless head panel

This high abrasion area is made from only 1 panel and does not carry any exposed seams, preventing any potential weak point in this area. As a result, seam creep and seam-related failure have been eliminated.

EM3

Durable and lightweight

eM3 is developed to combine the performance of the e-series cloths with maximum durability. The addition of a 90-degree pre preg polyester scrim has provided unique tear resistant characteristics and the off-axis loads are carried through the 22-degree X-ply fibres. The red and new blue adhesive maintain the UV resistance and tear strength, while the reduced film thickness significantly reduces the weight. The use in the upper panels reduces not only the overall sail weight, but also the swing weight, aiding manoeuvrability and control. Used in the BLADE and in the FREEK.

Boom height reference

Boom height gauge for ease of reference.

Internal printed x-ply

Printing the films prior to lamination with the x-ply gives us the flexibility to use multi-coloured, custom graphics. The print is of minimal thickness, reducing weight and producing a higher definition of colour. During lamination the printed side is placed on the inside of the film so there is no need to worry about wear. Your sails will forever remain looking bright and fresh.

Convertible batten system

The 2017 S-1 can be run as either a 3 or a 4 batten sail depending on conditions and preference.

Seamless foot construction

A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.

3&4 roller tack pulley

Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.

Thermoformed tack fairing

Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.

Molded soft edge

With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.

Double seams

All Severne wave sails have 25mm double stitched window seams. The wider, single colour seam tape ensures maximum tear strength and crash resistance

Seamless foot construction

A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.

EM4

Based on the proven eM3 platform, the high load eM4 material features twice the amount of X-Ply fibre and increased film thickness to maximise durability. This new material allows weight reduction whilst maintaining puncture resistance and tear strength. Used in the lower impact zone in the sail.

SIZELUFFBOOMBATTENSWEIGHTHEADREC. MAST
3.43421423/42.5FIXEDSEVERNE 340 Wave
3.63631463/42.6ADJSEVERNE 340 Wave
4.03721523/42.7FIXEDSEVERNE 370 Wave
4.43841573/42.8FIXEDSEVERNE 370 Wave
4.84031623/42.9FIXEDSEVERNE 400 Wave
5.24191683/43.0FIXEDSEVERNE 400 Wave
5.64301743/43.1FIXEDSEVERNE 400 Wave
* Recommended mast lengths are dependent on rider weight: lighter riders may prefer a shorter/softer mast, while heavier riders may prefer a longer/stiffer mast.

Additional Information

Sail size

, , , , , ,

Sail Style

Wave

Skill Level

, ,

Colour

Red, Red/Orange

Reviews

There are no reviews yet.

Be the first to review “New 2020 Severne Mach 3 6.2”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

If you are based outside of the UK, we do not currently have postage available to your country during checkout. Use the form below to directly request an accurate delivery cost to your location and we'll be in touch as soon as we have a confirmed cost.

  • This field is for validation purposes and should be left unchanged.

So you would like to try one of the exciting ranges of Severne sails from Severneshop.com?

Only we offer Demo sails sent directly to your door to try at your local sailing spot and at your leisure. For only £30 (UK mainland) to cover postage we will send you your choice of sail, a compatible mast and extension so your experience with our demo kit is the best anywhere.

We will hold your card details for a security deposit of £1000 but will only cash this if the sail is not returned on time. It’s easy. You try… then you buy - The SeverneShop way!

Complete your details below to let us know of your interest.

  • This field is for validation purposes and should be left unchanged.

Severneshop