Save up to 50% - Join the revolution!

Severne Turbo GT 2019


Single / Twin Cam

The 2019 Severne Turbo GT utilises cams to enhance foil stability and induce pre-set profile for power and drive through gusts and lulls.

Product Description

All cams are positioned below the boom to lock the power zone very low in the sail where it can most easily be controlled. Swing weight is also improved by lowering all the hardware and allowing the upper sections to flex and exhaust freely.

The 2019 Turbo GT can be run on either RDM or SDM masts. Incredible rotation is the advantage on the RDM mast, and increased stability is the benefit of an SDM mast. Both options will deliver blazing speed, early planing and an ultralight feel.

For 2019 significant gains were made in speed and stability; AERO-LINE battens and Mach1 twist patterns dramatically improve the aerodynamics for a faster sail. Increased skin tension and a refined batten skeleton improves stability and extends the wind range.

The 2019 Severne Turbo GT delivers cam performance.

Key Features

  • Aero-line battens
  • eM4 material upgrade
  • Improved stability
  • Improved speed

Upgrades for 2019

  • Monofilm body – maximum stability and performance
  • Kevlar x-ply luff panel – minimal vertical stretch with horizontal elasticity
  • eM4 foot panel – increased durability with reduced weight
  • Tube battens – high performance stability


Freeride and Freerace

Ideal for windfoiling

SDM Mast
APEX PRO – For ultimate performance
APEX – High end performance with increased reliability

RDM BLUE – High end performance with increased reliability.

ENIGMA – For the ultimate performance
BLUELINE – For uncomplicated reliable performance

Seamless Head Panel

A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.

Stabilizor Panel

A key component in stabilising the leading edge, the STABILIZOR PANEL is a panel of thicker 188 Monofilm. This material has minimal stretch in all directions and enables the high skin tension to create a very rigid profile for instant acceleration and maximum wind range.

Another benefit of the low stretch properties of 188 Monofilm is that the designed sail shape is maintained for longer as there is less long term stretch. This is pretty important as there are high downhaul loads which can cause most race sails to lose their original shape quickly.

SpiderFibre Race

SpiderFibre on the leech of the sail massively increases the perimeter strength and inhibits vertical stretch between the sail panels.

Boom Height Reference

Boom height gauge for ease of reference.

Seamless foot construction

A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.

Dropped Clew

The Dropped Clew allows for the reduction of boom and luff lengths; reducing the swing weight, increasing stability and promoting manoeuvrability.

3&4 roller tack pulley

Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.

Molded Soft Edge

With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.

Thermoformed Tack Fairing

Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.


Based on the proven eM3 platform, the high load eM4 material features twice the amount of X-Ply fibre and increased film thickness to maximise durability. This new material allows weight reduction whilst maintaining puncture resistance and tear strength. Used in the lower impact zone in the sail.

SCRIM: Polyester
X-PLY: Polyester x 2
GSM: I90gsm

5.54331773.515FIXEDSEVERNE 400
6.04471843.615FIXEDSEVERNE 430
6.54601863.815FIXEDSEVERNE 430
7.04631914.426FIXEDSEVERNE 430
7.54841944.726FIXEDSEVERNE 460
8.14902124.826FIXEDSEVERNE 460
8.64922165.026FIXEDSEVERNE 490
9.25162185.226FIXEDSEVERNE 490
* Recommended mast lengths are dependent on rider weight: lighter riders may prefer a shorter/softer mast, while heavier riders may prefer a longer/stiffer mast.

Additional Information

Sail size

, , , , , , ,

Sail Style


Skill Level



Blue/Blue, Red/Blue


There are no reviews yet.

Be the first to review “Severne Turbo GT 2019”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

If you are based outside of the UK, we do not currently have postage available to your country during checkout. Use the form below to directly request an accurate delivery cost to your location and we'll be in touch as soon as we have a confirmed cost.

  • This field is for validation purposes and should be left unchanged.

So you would like to try one of the exciting ranges of Severne sails from

Only we offer Demo sails sent directly to your door to try at your local sailing spot and at your leisure. For only £30 (UK mainland) to cover postage we will send you your choice of sail, a compatible mast and extension so your experience with our demo kit is the best anywhere.

We will hold your card details for a security deposit of £1000 but will only cash this if the sail is not returned on time. It’s easy. You try… then you buy - The SeverneShop way!

Complete your details below to let us know of your interest.

  • This field is for validation purposes and should be left unchanged.